Description
1. General The specifications are applicable to Lidinglong motor models BL2260
2. Operating condition
| Item | Specification | Condition remark | |
| 2-1 | Use voltage range | 12~24V DC | |
| 2-2 | Use temperature range | -20 ~ +80°C | No icing, no condensation, no moisture condensation, no chemical corrosion |
| 2-3 | Use humidity range | 40% ~ 85%RH | No moisture condensation, no chemical corrosion |
3. Measuring condition
| Item | Specification | Condition remark | |
| 3-1 | Temperature | +5 ~ +35°C | Tested at normal temperature and humidity, if there is any doubt about the results, the test data at 20 ± 3 °C shall prevail |
| 3-2 | Humidity | (65±20%)RH | |
| 3-3 | Test voltage | 7.5V | DC |
| 3-4 | Test drive board | Skyrc motor tester | Skyrc motor tester |
| 3-5 | Position | Axial vertically downward | |
4. Mechanical specification
| Item | Specification | Condition remark | |
| 4-1 | Dimensions | Refer to the dimension drawing | Please refer to the outline drawing of the motor for details. |
| 4-2 | Weight | 160g | Only for products confirmed in this specification |
| 4-3 | Appearance and color | Front center and back black | Visual inspection |
| 4-4 | Hall line definition | Refer to the dimension drawing | Please refer to the outline drawing of the motor for details. |
| 4-5 | Motor wire length | Refer to the dimension drawing | Please refer to the outline drawing of the motor for details. |
| 4-6 | Motor shaft diameter length | Diameter 3.0mm length 10mm | Please refer to the outline drawing of the motor for details. |
| 4-7 | Motor mounting hole | None | |
5. Performance and characteristic
| Item | Specification | Condition remark | |
| 5-1 | Construction | no slot 2 poles
(thickness magnetization) |
|
| 5-2 | Rated voltage | 24V | DC |
| 5-3 | KV value | 1800KV±5% | Test under DC7.4V voltage, use a motor tester to test |
| 5-4 | No-load speed | 43500±5%rpm | Test under DC7.4V voltage, use a motor tester to test |
| 5-5 | No-load current | 1.0A Max | Test under DC7.4V voltage, use a motor tester to test |
| 5-6 | Torque coefficient Kt | 4.8mNm/A | Data for reference |
| 5-7 | Rated torque | 22.5mN.M | Data for reference |
| 5-8 | Rated speed | 43500rpm | Data for reference |
| 5-9 | Rated input current | 5.1A | Data for reference |
| 5-10 | Rated output power | 97W | Data for reference |
| 5-11 | Stall torque | 448mN.M Max | Data for reference |
| 5-12 | Stall current | 92A | Data for reference |
| 5-13 | Maximum input power(24V) | 500W | Data for reference |
| 5-14 | Inductance | ~ mH | LP-Q 1.0kHz |
| 5-15 | Terminal resistance | 260±15m Ω | Data for reference |
| 5-16 | Three-phase resistance difference | ≤10mΩ | Three-phase internal resistance difference |
*Note: All test data are measured by our test environment and test instruments, when the test environment and test instruments change, the test results will have certain deviations, when the decision has a difference
When there is a difference of opinion, our test environment and test equipment shall prevail.
6. Analog performance graph reference, analog voltage 24V (for reference purposes only):
7. Precautions for use
7-1: The motor should be carefully placed during transportation to avoid damage to the motor body and performance caused by collision and knocking.
7-2: The motor should be stored at room temperature and humidity (25℃, 65%RH) under ventilated environment to prevent moisture and chemical corrosion (Note: It is normal to see rust stains on the internal spindle after 6 months, but it is still considered as a qualified product if it does not affect the performance)
7-3: Don’t block the shaft often after connecting the power, and the welding should be finished within 5 seconds to avoid damaging the terminal or wire.
8. Remarks:
8-1:This specification is for engineering sample confirmation. Large-scale production will be executed according to this sample confirmation standard. After sample confirmation, please make sure to sign and return it.
8-2: If the sample crystal is confirmed, if the seal is not answered back within 3 working days, Leeding Dragon receives the user’s order to the user’s order when the default for the sample through confirmation.
9. Product packaging standard:
9-1: Each plate of pearl cotton placed PCS products:
9-2: neatly arranged trays of products are stacked in the packaging box;
9-3: Each box packing total quantity:
9-4: Seal the outer box with sealing tape, and paste the relevant information on the outer box as required by the customer for shipment;
Reviews
There are no reviews yet.